.:Info
Nick: alfons  Info
Age: 28
Location: Kerava

.:Projects by user
  • Functional case
  • Steelcylindersubwoofer
  • clock
  • front panels

    • .:Albums
    View all albums

  • Default
  • aw-6i speakers
  • case -13
  • clock
  • experimental laser
  • ghettoblaster
  • LED
  • RA: DS1200
  • Total trash
  • tv-table

    • .:


    Title: ghettoblaster
    Created: 09.05.2013 20:00
    sure 2x50W
    visaton bg 20
    monacor MPT-001 2pcs
    Front and back sides are fake carbonfibre. Frame is covered with durable and waterproof fabric. Case weight is about 3.3kg. Overall 5.5kg To do - Handle - roof for electornics - Grill
    Front and back sides...    		 Bigger grill will make nice illusion. Measurements are about 590x320x170
    Bigger grill will ma...    		 Effective volume of the case is about 22 litres.
    Effective volume of ...    		 I think one strut is missing in this pic.
    I think one strut is...
    Title: case -13
    Created: 24.04.2013 17:50
    No concrete casted yet.
    I finally have only one silent 120mm fan in PSU and another 200mm spectre pro fan for gpu/cpu So absolutely the loudest noisemakers are HDDs. This prototype is for them. There's 80mm fan at 3V inside yellow foam, which blows upwards and keeps hdd's temps under 40C. first results are quite positive! 3mm "hardboard" can silence very well. Even cardboard was sufficient.
    I finally have only ...
    Title: experimental laser
    Created: 26.03.2011 17:10
    Experimental Full case made from scratch. Full steel. Bitumen inside.

    I realized that bitumen is not the
    Ready. Painted with black "hammer varnish" which turned out pretty nice. Also painted with clear/dim varnish.
    Ready.    		 Handles
    Handles    		 Ready. Backside
    Ready.    		 Power Button
    Power Button...
    Bitumen installed. "4mm RS-bitumi 7,5kg/m2". I used around 6kg Overall weight is around 16kg + hardware.
    Bitumen installed. &...    		 Power Button
    Power Button...    		 I added nice extra IKEA handles, which are also really practical. It aint LAN case. Still lacking SuperB finishing ideas.
    I added nice extra I...    		 Dust filter. I dunno is the fabric the best choice. Perhaps little too dense. Surface area is 450cm2, and it covers two 12cm fans (2x100cm2)
    Dust filter. I dunno...
    Setup inside. PSU is screwed to "backpanel". Though backpanel or MOB's backpanel are not yet attached anywhere. Because backpanel is only fully open side, it is _bit_ more tricky to assembly components inside. "Fortunately" I dont replace my components every week or month. Also bitumen and acoustic foam/fabric will be installed inside. All the hot air is coming from that upper gap. I wonder does it need any mesh or something...
    Setup inside....    		 Setup inside. Because backpanel is only fully open side, it is _bit_ more tricky to assembly components inside. "Fortunately" I dont replace my components every week or month. Also bitumen and acoustic foam/fabric will be installed inside.
    Setup inside....    		 Two HDD bolted together with 3mm thick alu sheet. Also "legs" attached. I figured that legs because nothing else came mind. Vibration covers still missing
    Two HDD bolted toget...    		 I glued 4mm steel braces with epox. Also airtight seams are glued with epox. Also MOB slides are glued. I would weld them but had no time.
    I glued 4mm steel br...
    Bottom frame, 4mm steel. Wooden legs are 38mm tall. Dust filters are coming to that 38mm wide gap.
    Bottom frame, 4mm st...    		 Back panel from old "functional (not) case" Left hole is for 120mm PSU and the right one is for 120mm chassis fan
    Back panel from old ...    		 I got like 1-2h to make this body ready. Got too hurry. Size is 345mm x 350mm x 310 + 40mm (Width, Depth, Height)
    I got like 1-2h to m...    		 Ruukki laser. 2mm thick steel
    Ruukki laser. 2mm th...
    Title: LED
    Created: 01.03.2011 18:04
    10W high power led
    This is evolution version. 10W LED, digital voltage meter and USB+5VDC plug. Electronics are stuffed too small space. This thing goes to category: "Do first and plan later and add little more stufff inside" I dont recommend those 18650 cells. They'r fine but better ones are available. I measured ~1850mAh real capacity with 0,75A current.
    This is evolution ve...    		 ALL improvements are welcome!
    ALL improvements are...    		 Bathroom. Only light source is led. Lamp should burn at least 1h. Or even 3h
    Bathroom. Only light...    		 Frame is 3mm thick steel. TIG welded. black paint + varnish. Rubber band is only temporary fix
    Frame is 3mm thick s...
    4x Li-ion 3,7V 2,5Ah batteries max voltage: 16,8V / 1,5...2Ah LED: sku 5876 batteries: sku 19624 DX has finally commercial alternative in many shapes: sku 103855
    4x Li-ion 3,7V 2,5Ah...    		 Constant current Driver. 1A All thanks to "Jounika" @murobbs
    Constant current Dri...
    Title: Total trash
    Created: 07.02.2009 00:52
    pc-case for my personal computer, made from old case..
    There is fan's place. It blows to left.
    There is fan's place...    		 there you can see air intake gaps..
    there you can see ai...    		 Case needs one "blow sheet" for the HDD, and sidepanel of course. Also the fan is missing, it's place is left-top corner, and it blows back out
    Case needs one "...    		 case needs just sidepanels.. specs for fools: p5k se QX9800 @ 3gHz HD4830
    case needs just side...
    ..
    ..    		 frontpanel, top, bottom, and floors made from plywood. Top floor is for exhaust and bottom floor is for coldair. You are not going to get the whole image yet but you will see
    frontpanel, top, bot...    		 panel for power
    panel for power...    		 old case cut
    old case cut...
    old old case from back 60's or something
    old old case from ba...
    Title: RA: DS1200
    Created: 08.01.2009 14:19

    DS1200, 12''
    DS1200, 12''...    		 painted case for amplifier - someone will ask anyway.. so yes there are 370W
    painted case for amp...    		 different anglee #2
    different anglee #2...    		 different angle
    different angle...
    ready
    ready    		 Rythmik Audio DS1200, 12'' sealed steel enclosure
    Rythmik Audio DS1200...
    Title: clock
    Created: 24.07.2008 21:28
    small desk clock.
    pretty ready clock. looks great from longer view, but there are few "not-so-good-looking" -spots
    pretty ready clock....    		 stainless steel stand. stand is coming in front of plexi and leds are behind the stand, under the plexi
    stainless steel stan...    		 stuff for clock. i will put the clock to under (stainless)steel case and plexi is clock face. i need to engrave(TM:) the numbers and light them with (green?) leds. should i engrave by free hand or what?
    stuff for clock. i w...
    Title: tv-table
    Created: 07.05.2008 16:48

    in use
    in use    		 before...
    before...    		 ...after exposure distorts the real color.
    ...after    		 almost ready tv-table needs only paint. im going to use Osmocolor: Eben wax, which is pretty much black
    almost ready tv-tabl...
    skech for my tv table
    skech for my tv tabl...    		 more pics will come in future
    more pics will come ...
    Title: aw-6i speakers
    Created: 09.03.2008 20:52
    homemade speakers. elements bought from hifitalo. (aka chorus compact 662)
    diy banana plugs bought from hongKong<3 ..and i regret.. plugs sux!
    diy banana plugs bou...    		 ready front panels
    ready front panels...    		 ready panels
    ready panels...    		 i glued rivals with epox
    i glued rivals with ...
    front panels for my speakers. dont worry, im going to paint these with black spray
    front panels for my ...    		 diy aw-6i. first speaker is my brother's and its not ready yet
    diy aw-6i. first spe...
    Default album
    http://www.evertop.co.uk/p/1183310/samsung-galaxy-s-gt--i9000-extended-battery-3000mah-with-free-back-cover-eb575152vu-replacement.html Nothing really modded yet. But price was farely cheap and shipping super fast. Backcover is only a bit flimsy, matte and fingerprint-proof. Dunno about battery yet, but it says 3500mAh. Jihuu! extra 500mAh.. or not. Battery lasted 92h with ~3h display on. Neat e: 22.12.2013 This battery is full of crap, i dont recommend it. its pretty much useless right now.
    http://www.evertop.c...    		 LG FLATRON IPS236 Original stand was very/VERY wobbly "stick type". (Goog./img.) New stand is bolt only and no welds. More sturdier and smaller. The desinger is real cocksucker anyway. That back profile is twisted, which makes adapting hard. There is VESA 100 holes but surface is very twisted. argh..
    LG FLATRON IPS236...    		 flame cutted FinChick, 10mm steel
    flame cutted FinChic...    		 lapped E2160 (I also lapped boxed cooler but still the great effect is missing! :() pencilmod on mobo, it works somehow
    lapped E2160 (I also...